102 IronWorks Custom Series – THE ELIMINATOR Tilt-Bed Steel Floor Car Hauler
All Tubing Construction: (Approximately 250lbs. lighter than channel construction)
Standard Equipment Configuration
This trailer is only available in 20ft, or 22ft bed lengths
20' Bed - - Overall Length 28ft, Length of Bed 20ft, 83 in Between Fenders,
22' Bed - - Overall Length 30ft, Length of Bed 22ft, 83 in Between Fenders,
Actual Usable Bed Width is 78.5" with 3500lb Axles, because the bed tilts inside the main frame
Actual Usable Bed Width is 75.5" with 5200lb Axles, because the bed tilts inside the main frame
7000lb axles not available on this trailer
Full Bed tilts
Manual Tilt with Hydraulic Dampner.
Racer Box std with painted steel doors, is 42in tall x 82-1/2in wide x 35in front to back. Doors open on each side.
5in Tubular Tongue & Frame 3in Tubular Crossmembers 16in o.c.
Steel Tread Plate Floor
2in 7000lb Bulldog Cast Coupler Drop Leg Jack Safety Chains with Locking Hook
Four 6000lb rated. 360 degree, rotating D-rings in floor
Primed & Painted Top & Bottom
Teardrop Fenders lined with chrome trim 9in Fender height Built-in Fender Clearance Lights Aluminum Rock Guard on Fenders
Aluminum Step Plates Front & rear of fenders.
3500lb Axles, electric brakes on one.
Breakaway Battery Box & Switch
LED Tail lights are now standard on this trailer
ST205/75R15 6 Ply Radial Tires on 15in Mod wheels
3500lb axles with 5" Standard Tube Frame 5200lb axles with 5"x3/16" Tube Frame Hvy Pkg I
20' $10150. 20' $ 10550.
22' $ 10480. 22' $ 10880.
With 3500lb Axles, actual bed with is 78.5" With 5200lb Axles the actual bed width is 75.5"
Picked up in Fort Worth, Texas
Order yours today, available in nine poplular colors
Trailer pictured above has two options - - the ALUM Trim on racer box $ 95.00
Options - - just add these to base price of trailer above:
COUPLERS AND JACKS
COUPLER 2-5/16" BULLDOG
(upgrade from 2" BD)
JACK 7k DROP LEG (upgrade from flip jack)
ELECTRICAL / LIGHTS
SHEILD - ALUMINUM 42"
LED LOADING FLOOR
LIGHTS (2) with Switch
SHIELD- ALUM upgrade on Mcycl
EXTRA LED CLEARANCE LIGHTS (3 each side)
STAKE POCKETS / TIE LOOPS ea.
WIRING - IN CONDUIT
TIRE RACK on Racer Box or Floor
TONGUE BOX ALUM (Small Mcy)
TONGUE BOX ALUM (Large)
ALUM TRIM ON RACER BOX 1"X1" Angle
ALUM ON FRONT OF RACER BOX
WHEEL CHOCK (carry out)
ALUM ON TOP OF TONGUE
WHEEL CHOCK welded in trlr
ALUM ON REAR OF FENDERS
WINCH MOUNT (plate or tube)
ALUM ON TOP OF FENDERS
ALUM LINING SPLIT TAIL AREA
REDFIRE MIST PEARL, WHITE, YELLOW
TWO TONE PAINT
CROSS MEMBERS (upgrade 16" to 12")
DOUBLE EDGE STRIPING
D-RINGS 5k STD FIXED (Additonal) ea
UNDER COAT (on std trailers)
D-RINGS 6k SWIVEL (Additional) ea
BATTERY MOUNTING TRAY (steel welded in)
3.5k Brake Axle w/ breakaway
MAKE TRAILER A GOOSENECK (Low Boy only) 8"Chnl
2nd 3.5k Brake Axle
2nd 5.2k Brake Axle
2nd 7.0k Brake Axle
REMOVABLE FENDER (per side)
15 6ply 5 lug silver
SPARE TIRE MOUNT - SIDE OR FRONT Welded on
ST225/75R15 8ply 6 lug silver
ST235/80R16 10ply 8 lug silver
15" ALUMINUM WHEELS (4ea)
16" ALUMINUM WHEELS (4ea)